The genuine OEM Whirlpool / KitchenAid 8171414 Refrigerator Ice & Water Filter fits Whirlpool, KitchenAid, Jenn-Air, and Kenmore refrigerators with a round plastic filter located inside the refrigerator compartment.
The Whirlpool 8171414 refrigerator/icemaker water filter replaces the following older part numbers:
Whirlpool
- 8171414R, 8171414P, 8171414T, WFI-NLC200, NLC200, WFI-NLCS200, NLCS200
- 8171788
Specifications
- Filter Life: 6 months or 200 gallons (whichever comes first)
- Flow Rate: 0.5 gallons per minute
- Operating Pressure: 30-120 psi
- Operating Temperature: 33-100 °F
- Filter Size: 5-3/4" (Length) x 3-1/2" (Diameter)
- Country of Origin: Mexico
Contaminant Reduction
The Whirlpool 8171414 filter cartridge replacement is tested and certified by NSF International to meet or exceed NSF/ANSI Standards 42 & 53 for the reduction of:
- 97.00% of Chlorine
- 99.30% of Lead
- 99.99% of Cysts
- 99.50% of Turbidity
- 99.96% of Particulates
How to Replace the Whirlpool / KitchenAid 8171414 Filter
- Turn the used filter counterclockwise 1/4 turn and pull the filter straight out (The water shuts off automatically so you don’t have to worry about flooding your refrigerator)
- Push the new filter straight into the fridge and turn it clockwise 1/4 turn
- If your refrigerator has a “Change Filter“ light, reset it
How to Reset the "Change Filter" Light
- Press the light switch (the one that the refrigerator door presses every time you close the door) 5 times within 10 seconds
OR
- If the refrigerator has a filter button, press and hold it for 5-10 seconds
