GE MSWF Interior Refrigerator Filter

The genuine OEM GE SmartWater MSWF replacement filter fits GE refrigerators with a round, long filter, mounted inside the refrigerator in the rear upper right corner above the top shelf.

• Filter Life: 6 months or 300 gallons (whichever comes first)
• Flow Rate: 0.9 gallons per minute
• Operating Pressure: 20-120 psi
• Operating Temperature: 33-100 °F
• Filter Size: 8-1/2" (Length) x 2-1/4" (Diameter)
• Country of Origin: U.S.A.

• 97.00% of Chlorine
• 99.30% of Lead at pH 6.5
• 98.00% of Lead at pH 8.5
• 94.00% of Mercury at pH 6.5
• 88.40% of Mercury at pH 8.5
• 99.99% of Cysts
• 99.00% of Asbestos
• 96.80% of Benzene
• 99.70% of P-Dichlorobenzene
• 93.90% of Atrazine
• 98.70% of Carbofuran
• 99.00% of Lindane
• 92.90% of Toxaphene
• 96.00% of 2,4-D
• 96.50% of Turbidity
• 95.50% of Particulates (Class I)

• Turn the used filter counterclockwise 1/2 turn and pull the filter straight down (The water shuts off automatically so you don’t have to worry about flooding your refrigerator)
• Fill the new filter with water (You may use cold water from your tap)
• Push the filter straight up into the fridge and turn it clockwise 1/2 turn
• Dispense 1 or 2 gallons of water from the dispenser to clear the filter and prevent sputtering
• If your refrigerator has a “Change Filter“ light, reset it

• If your refrigerator has a LCD screen, press the “Filter Replaced“ button
• If your refrigerator does not have a LCD screen, press and hold the “Reset Filter“ button on the dispenser for 3 seconds